2011 Ford F 150 Air Intake Kit Parts

Choose your Submodel for your 2011 Ford F-150

FX2 FX4 Harley-Davidson Edition King Ranch Lariat Lariat Limited Platinum STX SVT Raptor XL XLT

Showing 1 - 9 of 9 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2011 Ford F-150 Air Intake Kit 8 Cyl 5.0L Injen

Includes Roto-Molded Housing W/Boost Plenum And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +17 HP/Torque Gains +16 ft./lbs. ;Not Legal For Sale Or Use In California
Evolution Series Air Induction System; Includes Roto-Molded Housing W/Boost Plenum And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +17 HP/Torque Gains +16 ft./lbs. ;
Evolution Series Air Induction System
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium; Nickel; Carbon Black And Cobalt; Which Are Known To The State Of California To Cause Cancer.
Features:
- Fully Enclosed Rotational Molded Induction System
- Comes w/Built-In Filter Monitor For Easy Cleaning
- 100% CAD Designed For An Easy Install
- SuperNano-Web Dry Filter
- Dyno Tuned For Max Power And No Check Engine Lights
- Automotive Grade Couplers and Hoses
- Stainless Steel Hardware/Clamps And Screws
The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9108 is specifically engineered for the 2011-2014 Ford F-150 with the 5.0L engine. Every EVO9108 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Ford F-150	V	4951	8 Cyl 5.0L	Lariat	302

2 In Stock

$577.60 CAD

$693.12 CAD

Brand	Injen
Part #	I24EVO9108
Condition	New
Warehouse	B

2011 Ford F-150 Air Intake Kit 6 Cyl 3.5L K&N

Performance Air Intake System
Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.05 HP At 4318 RPM;CARB E.O. D-269-48
K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Filtercharger Injection Performance Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 11.05 Hp @ 4318 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-5173
- Item Weight: 12.000 Lbs. (5.4 Kg)
- RPM: 4318
- Product Box Height: 15.600 In. (396mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 20.200 In. (513mm)
- Air Filter Outlet Length: 0.625 In. (16mm)
- Product Box Length: 24.200 In. (615mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 11 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 3
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Ford F-150	V	3496	6 Cyl 3.5L	FX2	213

1 In Stock

$477.98 CAD

$573.58 CAD

Brand	K&N
Part #	K3357-2583
Condition	New
Warehouse	B

2011 Ford F-150 Air Intake Kit 8 Cyl 5.0L K&N

Performance Air Intake System
Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 12.05 HP At 5304 RPM;CARB E.O. D-269-48
K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Filtercharger Injection Performance Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.05 Hp @ 5304 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-5173
- Item Weight: 10.600 Lbs. (4.8 Kg)
- RPM: 5304
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 0.625 In. (16mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Ford F-150	V	4951	8 Cyl 5.0L	FX2	302

8 In Stock

$477.98 CAD

$573.58 CAD

Brand	K&N
Part #	K3357-2581
Condition	New
Warehouse	B

2011 Ford F-150 Air Intake Kit 8 Cyl 6.2L K&N

Performance Air Intake System
Includes Air Filter/Heat Shield/Tubing/Hardware; Estimated Horsepower Gain 27.18 HP At 5347 RPM;CARB E.O. D-269-48
K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Filtercharger Injection Performance Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 27.18 Hp @ 5347 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-5173
- Item Weight: 12.300 Lbs. (5.6 Kg)
- RPM: 5347
- Product Box Height: 10.500 In. (267mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 13.250 In. (337mm)
- Air Filter Outlet Length: 0.625 In. (16mm)
- Product Box Length: 35.500 In. (902mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 27 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Ford F-150	V	6210	8 Cyl 6.2L	Lariat Limited	379

Brand	K&N
Part #	57-2584
Condition	New
Warehouse	C

2011 Ford F-150 Air Intake Kit 8 Cyl 6.2L K&N

Performance Air Intake System
Textured Black; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 20.04 HP At 4830 RPM;CARB E.O. D-269-48
K/N s easy-to-install performance air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a black powder coat finish.
Performance Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 8.000 In. (203mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 20.04 Hp @ 4830 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1044xd
- Item Weight: 15.500 Lbs. (7.1 Kg)
- RPM: 4830
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 6
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Textured Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 20 Hp
- Intake Pipe Inlet Length: 26.000 In. (660mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.250 In. (83mm)
- Intake Pipe Outlet Length: 26.000 In. (660mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.500 In. (89mm)
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
The K&N 77-2579KTK high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford F150 SVT Raptor models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-2579KTK air intake comes with a K&N high-flow air filter, heat shield and replacement coolant reservoir that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive textured black powder-coat finish that's made to last and it accommodates the factory mass air sensor, EVAP hose and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Ford F-150	V	6210	8 Cyl 6.2L	SVT Raptor	379

Brand	K&N
Part #	77-2579KTK
Condition	New
Warehouse	C

2011 Ford F-150 Air Intake Kit 8 Cyl 5.0L K&N

Performance Air Intake System
Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 7.98 HP At 5006 RPM;CARB E.O. D-269-57 71 Series Blackhawk - Metal Intake Kit For Truck or SUV; Black
K/N Blackhawk Induction cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Blackhawk Air Induction Kit
Product Attributes:
- Oil Included: No
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 7.98 Hp @ 5006 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-3102hbk
- Item Weight: 12.100 Lbs. (5.5 Kg)
- RPM: 5006
- Product Box Height: 10.500 In. (267mm)
- Filter Material: Non-woven Synthetic
- Air Filter Outlet Shape: Round
- Product Box Width: 13.250 In. (337mm)
- Product Box Length: 35.500 In. (902mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Color: Textured Black
- Clamp Color: Black
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Carbon Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Horse Power Increase: 8 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Filter Color: Black
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Air Filter
- Made From All Black Components
- Lasts Up To 100 000 Miles Before Service
- Easy To Install
- Million Mile Limited Warranty
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Ford F-150	V	4951	8 Cyl 5.0L	FX2	302

Brand	K&N
Part #	71-2581
Condition	New
Warehouse	C

2011 Ford F-150 Air Intake Kit 8 Cyl 5.0L K&N

Performance Air Intake System
Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 9.95 HP At 5508 RPM;CARB E.O. D-269-48
K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Performance Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 9.95 Hp @ 5508 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-5173
- Item Weight: 12.100 Lbs. (5.5 Kg)
- RPM: 5508
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 0.625 In. (16mm)
- Clamp Quantity: 5
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 10 Hp
- Intake Pipe Inlet Length: 26.000 In. (660mm)
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 26.000 In. (660mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.250 In. (83mm)
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Ford F-150	V	4951	8 Cyl 5.0L	FX2	302

Brand	K&N
Part #	77-2581KP
Condition	New
Warehouse	C

2011 Ford F-150 Air Intake Kit 8 Cyl 6.2L K&N

Performance Air Intake System
Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 18.77 HP At 5267 RPM;CARB E.O. D-269-48
K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N 10-Year/Million Mile Limited Warranty.
Performance Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 18.74 Hp @ 5267 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-5173
- Item Weight: 12.700 Lbs. (5.8 Kg)
- RPM: 5267
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 0.625 In. (16mm)
- Clamp Quantity: 5
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 19 Hp
- Intake Pipe Inlet Length: 31.000 In. (787mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 31.000 In. (787mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.500 In. (89mm)
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Ford F-150	V	6210	8 Cyl 6.2L	Lariat Limited	379

Brand	K&N
Part #	77-2584KP
Condition	New
Warehouse	C

2011 Ford F-150 Air Intake Kit 8 Cyl 6.2L K&N

Performance Air Intake System
Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 20.41 HP At 5347 RPM;CARB E.O. D-269-57 71 Series Blackhawk - Metal Intake Kit For Truck or SUV; Black
K/N Blackhawk Induction cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Blackhawk Air Induction Kit
Product Attributes:
- Oil Included: No Filter Oil Required
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 20.41 Hp @ 5347 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-3102hbk
- Item Weight: 12.800 Lbs. (5.8 Kg)
- RPM: 5347
- Product Box Height: 10.250 In. (260mm)
- Filter Material: Non-woven Synthetic
- Air Filter Outlet Shape: Round
- Product Box Width: 18.130 In. (460mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 36.190 In. (919mm)
- Clamp Quantity: 2
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Textured Black
- Clamp Color: Black
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 20 Hp
- Intake Pipe Inlet Length: 31.000 In. (787mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 31.000 In. (787mm)
- Filter Color: Black
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.500 In. (89mm)
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Air Filter
- Made From All Black Components
- Lasts Up To 100 000 Miles Before Service
- Easy To Install
- Million Mile Limited Warranty
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.